qlogic forcelip problem
Hello all!
We got a strange problem on our servers (M9000, t3-4) with 8Gbit qlogic fc hbas. When we issue Luxadm -e forcelip /devices/....
on hpa port , it cannot find its devices. It stays connected but it cannot see the luns. luxadm -e dump_map is hanging.
If I physically reconnect the cable, everything is ok. No problem to find the end devices. But forcelip doesn't work again and again.
We connect to EMC VMAX through Brocade DCX Fos 6.4.2a.
The procedure of logging into SAN consists of three main steps.
1. LINK phase. It checks up the light and speed on hba and DCX port.
We got a strange problem on our servers (M9000, t3-4) with 8Gbit qlogic fc hbas. When we issue Luxadm -e forcelip /devices/....
on hpa port , it cannot find its devices. It stays connected but it cannot see the luns. luxadm -e dump_map is hanging.
If I physically reconnect the cable, everything is ok. No problem to find the end devices. But forcelip doesn't work again and again.
We connect to EMC VMAX through Brocade DCX Fos 6.4.2a.
The procedure of logging into SAN consists of three main steps.
1. LINK phase. It checks up the light and speed on hba and DCX port.
0