T4-1: info on LSI_LogicalVolume tag on disks previously used in an hw raid
Just a quick doublecheck.
I was playing with the T4-1 hw raid using the "sas2ircu" binary I got
from the LSI link, eventually I decided to discard thefull configuration
done.
Checking eventually witht the "sas2ircu" command I found that no IR volume was in place and everything was removed.
BTW I saw something strange from the format output.
Now the tag of the disks I used is <LSI-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 557> instead of what I had before
<SUN600G cyl 64986 alt 2 hd 27 sec 668>
Is this expected or not? In case not how can I reset the disk tag?
Checking eventually witht the "sas2ircu" command I found that no IR volume was in place and everything was removed.
BTW I saw something strange from the format output.
Now the tag of the disks I used is <LSI-LogicalVolume-3000 cyl 65533 alt 2 hd 32 sec 557> instead of what I had before
<SUN600G cyl 64986 alt 2 hd 27 sec 668>
Is this expected or not? In case not how can I reset the disk tag?
0