What is MB_DC_POK sensor ?
Hello
I have a question about MB_DC_POK sensor.
Neither ALOM shell nor ILOM shell show the sensor on T2000 and T5220 I have here. What does it mean on these platforms ?
I find this sensor in ALOM 1.3/1.4 guide below
Critical Host Power Failure: MB_DC_POK Fault.
ALOM CMT sends this message to indicate a problem with the power convertors or Power-OK sensors. The system is unable to remain powered on
as a result.
This message indicates a problem with the platform hardware. The SC will attempt to powercycle the system to recover from the fault.
This fault event message appears in the output of the ALOM CMT showfaults command.
I have a question about MB_DC_POK sensor.
Neither ALOM shell nor ILOM shell show the sensor on T2000 and T5220 I have here. What does it mean on these platforms ?
I find this sensor in ALOM 1.3/1.4 guide below
Critical Host Power Failure: MB_DC_POK Fault.
ALOM CMT sends this message to indicate a problem with the power convertors or Power-OK sensors. The system is unable to remain powered on
as a result.
This message indicates a problem with the platform hardware. The SC will attempt to powercycle the system to recover from the fault.
This fault event message appears in the output of the ALOM CMT showfaults command.
1