Sun ZFS 7120 Appliance configuration issues in 10G ethernet
We are facing difficulties in configuring a new zfs 7120 appliance. Below is the setup summary
Sun ZFS 7120 Appliance. BUI configured on onboard igb0 interface and accessible. Has two dual port 10G Ethernet HBAs. Each card connected directly to each SPARC T4-2 server ( No switch in between). This appliance has to be used as a shared disk for the SPARC T4-2 cluster servers.
Created Datalink on the physical interface,configured ip on the Datalink. Configured IP on the server side. Tested ping and worked. After some time it stopped ping. It is the same for other interface too. When checked the arp entry it is found that there is no entry on the host for this IP. Added manual arp entry and it started pinging. After few seconds it is observed that the arp entry got deleted.