Amber LED on each power supply/fan module in a Brick is illuminated even though GUI shows PS status
If the amber LED is illuminated on both Power Supply/Fan Modules in a Brick and the GUI status shows them as Normal and the Brick is operating normally with no loss of access to data then check the following:
1. Check to ensure fans are turning using a flashlight and/or paper blowing test. (If they are not then a Service Request should be opened with Oracle Support and a current set of logs uploaded to the call home server or SR.)
2. Make sure the Brick isn't being "Beaconed" (aka Identified) in the GUI.
3. Make sure the Brick hasn't experienced a temperature issue recently. (If it has then a Service Request should be opened with Oracle Support and a current set of logs uploaded to the call home server or SR.)
1. Check to ensure fans are turning using a flashlight and/or paper blowing test. (If they are not then a Service Request should be opened with Oracle Support and a current set of logs uploaded to the call home server or SR.)
2. Make sure the Brick isn't being "Beaconed" (aka Identified) in the GUI.
3. Make sure the Brick hasn't experienced a temperature issue recently. (If it has then a Service Request should be opened with Oracle Support and a current set of logs uploaded to the call home server or SR.)
0