Solaris 11 T4 SAN boot steps
Hello exports,
I am working on a project that I, have bunch of T4s with only one internal disk. The servers are up running Solaris 11.1. Now the customer is asking me to create a secondary SAN boot disk? I was wondering if you all have any step-by-step directions that I can follow without corrupting the internal boot disk. I have found steps for X86 but surprisingly not much for Sparc. Below are my HBA cards info:
/SYS/MB/PCIE1 PCIE SUNW,qlc-pciex1077,2532 QLE2562 5.0GTx4
/pci@500/pci@2/pci@0/pci@a/SUNW,qlc@0
/SYS/MB/PCIE1 PCIE SUNW,qlc-pciex1077,2532 QLE2562 5.0GTx4
I am working on a project that I, have bunch of T4s with only one internal disk. The servers are up running Solaris 11.1. Now the customer is asking me to create a secondary SAN boot disk? I was wondering if you all have any step-by-step directions that I can follow without corrupting the internal boot disk. I have found steps for X86 but surprisingly not much for Sparc. Below are my HBA cards info:
/SYS/MB/PCIE1 PCIE SUNW,qlc-pciex1077,2532 QLE2562 5.0GTx4
/pci@500/pci@2/pci@0/pci@a/SUNW,qlc@0
/SYS/MB/PCIE1 PCIE SUNW,qlc-pciex1077,2532 QLE2562 5.0GTx4
0