help：sun zfs storage 7410 cluster setup problem！

7410  cluster  active-active configuration。

because node 2  had  two  system disks fault， and system cannot boot normally。

node 1 system disk was pulled to node2 by split zpool  mirror， and boot with -c to factory reset node2。

node1  maintain --- cluster--- unconfig

and node2  leave at  press any key to 。。。continue

I want to resetup the cluster。

then， node1 maintain--cluster --setup， ，but  cannot continue setup with errs

“

NO PEER detected，， ，

somethings  wrong with my steps？？

the clustert heartbeat  cards  seems working normally，and leds are all green， command “cluster ..cable...show ” the connect are all active。