How to improve Ops Center 12c monitoring?
I am trying to configure a monitor on one system (just to see if it works), but it will only alert if the threshold is exceeded for longer then 120 seconds (2 minutes), way longer then acceptable to get alerted on, I would rely appreciated any help in how to improve the timing.
Below is what I tried (tested)
On one of our an assets .
1) Click on right side > Apply a Monitoring Policy > select Test OC - (Global Zone). Note: this is a copy of the original policy.
2) Click Monitoring > Alert Monitoring Rules > CPU Usage Percentage
Note: For this test I also modified the threshold to 2% instead of 90%(default).
Below is what I tried (tested)
On one of our an assets .
1) Click on right side > Apply a Monitoring Policy > select Test OC - (Global Zone). Note: this is a copy of the original policy.
2) Click Monitoring > Alert Monitoring Rules > CPU Usage Percentage
Note: For this test I also modified the threshold to 2% instead of 90%(default).
0