SNMP Traps: MBCD ALARM OUT OF PORTS.

Hi,

The description of the trap in case of MBCD out of ports situation is this:

apSysMgmtMediaPortsTrap:

1. 1.3.6.1.4.1.9148.3.2.6.0.6

Generated if port allocation fails at a percentage higher or equal to the system’s

default threshold rate.

Port allocation failure rates are checked every 30 seconds. The trap is sent when the

failure rate is at 50% or higher. After that time, the trap is sent every 30 seconds

until the failure rate drops below 35%. The clear trap is sent once the failure rate

drops below 5%.

Well, where can I check the System's default threshold rate?.

Thanks.