Seeking a procedure for an internal Drive replacement Sun Fire X220 M2 Server

I replaced the internal sata drive, but now I can't get the drive seen by Solaris (controller not seeing new disk).  Any idea on how to fix this?  I rebooted the server several time.

Before Drive Replacement:

# echo | format

Searching for disks...done

AVAILABLE DISK SELECTIONS:

       0. c1t0d0 <DEFAULT cyl 30397 alt 2 hd 255 sec 63>

          /pci@0,0/pci108e,534b@5/disk@0,0

       1. c1t1d0 <drive type unknown>

          /pci@0,0/pci108e,534b@5/disk@1,0

Specify disk (enter its number): Specify disk (enter its number):

# ccfgadm -al | grep c1

# cfgadm -al | grep c1

sata0/0::dsk/c1t0d0            disk         connected    configured   ok

sata0/1::dsk/c1t1d0            disk         connected    configured   failed