How do i replace a faulty disk on a Sun Fire X4200 configured in a Hardware RAID
Hi ,
i recently run lsiutil and confirmed the faulty disk i'm seeing in the raidctl output. My question is, how do i replace the faulty disk in this hardware configuration? does it need additional commands similar to that of solaris volume manager when replacing a disk? Thanks in advance for any answers.
# /usr/sbin/raidctl -l c0t0d0
Volume Size Stripe Status Cache RAID
Sub Size Level
Disk
----------------------------------------------------------------
c0t0d0 67.9G N/A DEGRADED OFF RAID1
0.1.0 67.9G GOOD
0.5.0 67.9G FAILED