Can we connect SBC 1100 with 1GB ports on the switch (for example Cisco Nexus)

Acme Packet 1100 SCZ9.0.0 Patch 7

phy-interface

    name                  INT

    operation-type             Media

    port                  0

    slot                  0

    virtual-mac

    admin-state               enabled

    auto-negotiation            disabled

    duplex-mode               FULL

    speed                  1000

    wancom-health-score           50

    overload-protection           disabled

INT (media slot 0, port 0)

   Flags: Down

   Type: UNKNOWN [net_e1000_igb]

   Driver: net_e1000_igb

   Admin State: enabled

   Auto Negotiation: disabled

   Duplex Mode: half

   Speed Selection: 0 Mbps

   Internet address: 10.100.247.5   Vlan: 0

   Broadcast Address: 10.100.247.15

   Netmask: 255.255.255.240

   Gateway: 10.100.247.1

   Maximum Transfer Unit size is 1500

   Ethernet address is 00:08:25:23:b5:11

   Virtual Ethernet address is 00:08:25:23:b5:11

   Metric is 0

   0 octets received

   0 octets sent

   0 packets received

   0 packets sent

   0 non-unicast packets received

   0 unicast packets received

   0 input discards

   0 input unknown protocols

   0 input errors

   0 output errors

   0 collisions; 0 dropped