Redwood
Discussion List
-
Editing the add materials page part on My Maintenance WorkSummary: Trying to add material description to the add material page to search on material description Content (please ensure you mask any confidential information): IS …
-
Knowledge Doc: Updated Maintenance All Redwood Initial Ingest and Bulk Ingest program parametersEnable and Set Up Redwood Pages Index Name Parameter for: Bulk Ingest parameter for: Page information ESS job to create index definition and perform initial ingest to OS…
-
Unable to select or add a standard work operations in the Maintenance Work Definition Redwood pageSummary: Unable to select or add a maintenance standard work operation on the Maintenance Work Definition Redwood page, even though this can be done on the ADF/earlier w…
-
IB Asset flexfieldSummary: Is it possible to search by a DFF filter at IB Asset Redwood page? Content (please ensure you mask any confidential information): Hey, we are trying to figure o…
-
Knowledge Doc: How Can I Diagnose Issues with Redwood UI?Context: When accessing the Materials tab in the My Maintenance Work section of the Redwood UI, no values are displayed. Should there be materials visible? Is there an u…
-
Why am I unable to enter Inspections Results in the Technician Workbench?Summary: I cannot enter Inspection Results on a Work Order in the Technician Workbench. Content (please ensure you mask any confidential information): I have set up an A…
-
Can not define or assign resource rate using RedwoodSummary: We need to define a resource rate to our maintenance organizations, however while definition and saving we get an error message Kindly note that we are already …
-
Ability to upload Excel Files in AI Guided Journeys through APISummary: Hi, We are trying to set up a new AI Guided Journey in our environment. In the "Tool" menu (from the initial dashboard, "my client groups" and then "configure A…
-
Enter valid locator in My maintenance work issueI am facing below error while performing issue of material. could you suggest if found similar issue ? I had correct Plant parameter and onhand of item is also in exact …
-
Asset Transfer in maintenance cloudHi, We are implementing Maintenance Cloud for a defense industry. The equipment (both enterprise and customer owned) requires regular transfer to different sites for tri…Balamuralikrishnan Vembu 28 views 3 comments 0 points Most recent by Aravinth Elangovan-Oracle Maintenance
-
Knowledge Doc: 24C Manage Maintenance Work Definitions Using a Redwood PageFeature Details > Steps to Enable the MNT WD Redwood UI. Step 1: Search the Task Manage Administrator Profile Values page, and search for the ORA_MNT_WORK_DEFINITIONS_RE…
-
How to remove Material assignment option from My Maintenance Work UIWe have a requirement to remove "Add" item option from My Maintenance Work UI. Can we achieve this requirement through Job role customization or Redwood page customizati…
-
Unable to Edit 'Notes' in Notes and Attachments Tab in My Maintenance Work Redwood UISummary: When we navigate to My Maintenance Work UI , click on Work order and navigate to 'Notes and Attachments' tab, we have add option to write any notes but what bus…
-
Where can we find the columns in OTBI for Work Order Notes from new My Maintenance Work?Currently with the Dispatch List, our technicians enter the completion notes when completing an operation. These notes are reviewed at the end of the week by a superviso…
-
Possibility to return to Dispatch List once the New Maintenance Technician Workbench is enabledWe are thinking to enable the New Maintenance Technician Workbench in our environment in Oracle Maintenance. In the Documentation it is written that setting the profile …
-
My Maintenance Work - "Operation Description" and "Work to Be Accomplished" code are not availableIn the My Maintenance Work window, Operation description Work to Be Accomplished" code are not appearing along with the respective operations. But from the Work order cr…
-
Attribute GoalTypeCode in view object GoalVOLogical cannot be setSummary: Hi Everyone, we are getting below error while loading development goals for employees. We are currently in 25B. If anyone has faced similar issue and got a solu…
-
Is there a list of redwood pages in which it is possible to enable the AI Guided Journey?Summary: For a customer using Oracle Maintenance Cloud, we are enabling all the available redwood pages, in order to then enable AI guided journeys in them through Visua…
-
Getting error while trying to access Maintenance Management in release 25BWhen trying to access Maintenance Management in Release 25B, we are getting error as shown in the screen shot attached. Can you please let us know, what we might be miss…Santosh Badiganti-Oracle 36 views 4 comments 0 points Most recent by Santosh Badiganti-Oracle Maintenance
-
Maintenance Work order costs not reflected in work order even though they're fully costedSummary: Hello, I am trying to create a supplier warranty, and the costs have been "fully costed" in cost accounting. However, when I "view costs" within the work order,…
-
Enabling Supervisor Work benchSummary: hi Team , I am trying to setup supervisor work bench followed all the steps mentioned in the below link, are there any opt-in features required to enable this f…Sanjeev Inampudi-Oracle 66 views 11 comments 0 points Most recent by Prasanth Senthivel-Oracle Maintenance
-
Maintenance Cloud Roadmap - support for OSP in My Maintenance workSummary: As per 24C user guide, Outside Processing (OSP) Operations is not supported in the Technician workbench. Looked through the roadmap information those are public…
-
Item Transaction default in Material Reporting screenSummary: hi Team, Can we default sub-inventory or sub-inventory locator combination in the below material reporting screen Content (please ensure you mask any confidenti…Sanjeev Inampudi-Oracle 11 views 4 comments 0 points Most recent by Prasanth Senthivel-Oracle Maintenance
-
Issue with OSP Work Order Operation Status in My Maintenance Work Redwood ScreenDear Team, We are facing an issue with the My Maintenance Work Redwood Screen related to the OSP Work Order Operation Status. Issue Summary: We have created a Work Order…
-
Unable to add material items in Supervisor Workbench due to unused field validationsSummary: This page needs an items search, I'd hate to have to maintain an excel sheet for people to find part numbers. When adding a required item the page tries to vali…
-
Supervisor workbench can only schedule backwards and not forwardsSummary: it seems that the workbench tries to validate the new start date to the completion date, instead of assigning the new start date and calculating the completion …
-
SO tab not showing in the Asset page & SO field not available in filters (Redwood)Hi All We are not able to see SO tab in the Assets page. Is there a setup we are missing ? 2. In the classic UI we could add SO field and add SO details to search the As…
-
MNT Supervision Workbench - multiple fields are mandatory when assigning a resource to the operationSummary: We are testing the Supervision Workbench, and it is found that when assigning a resource to the operation, the form shows the below fields mandory which we are …
-
Can we lock users out of Fusion HCM using Maintenance Mode?We would like to lock end-users out of Fusion HCM during our Prod Redwood Migration. Is there a maintenance mode we can activate to accomplish this temporary lock out? W…
-
Failing an inspection does not create a work order with the nominated work definitionSummary: Inspection has been setup with a DO action to create a work order with a work definition as below. when failing the inspection a work order is created, but it h…