Category 210
Discussion List
-
Is there any option to stop generating empty output interfacace recordsHi Team, Is there any way we can stop generating the output interface files which are generated fore file is empty. Iven output interface is empty lots of unnecessary re…SantoshM 21 views 1 comment 0 points Most recent by Geno Hawkins- Support -Oracle Warehouse Management -
Cycle Count task does not completeQuestion: Why does the Cycle count task remain in READY status even after task is done in the RF? Shouldn't it be updated to COMPLETED? Steps done as follows: Task Templ…claire.arano 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
An individual item may have multiple barcodeshow we can record the item barcodes? 2. An individual item may have multiple barcodes. These barcodes must be recorded in the system during the actual receiving process.…
-
Task Type Ordering on RFSummary: What is the default order of task type display on RF screen? Can the order be changed or can task types be suppressed from the list? I am referring to the list …
-
Non Cubed Picking SetupWe are setting up a new picking module that will be reserve case picks. The locations are permanent item assignment type with an item specified. The picks will be direct…Doug Fehl 31 views 3 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
No of Subinventory for DEFAULT_ERP_BUCKET_FOR_INBOUND_INVENTORYSummary: How many subinventory can be configured in the "DEFAULT_ERP_BUCKET_FOR_INBOUND_INVENTORY" parameter (both company and facility) ? Content (please ensure you mas…
-
Item unit cost not available at item facility.In OWMS, the unit cost are currently configured at the global item master level. This means the same unit cost is applied uniformly across all facilities. However, the c…Aniket Kadam-235775 21 views 4 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management -
Max Shipping tolarance DefaultHi Team, We are currently using MFCS and USM, and have noticed that when an order is created in MFCS and interfaces into WMS, the Max Shipping Tolerance is defaulted to …ScottyHam 21 views 3 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Is DEFAULT_ERP_BUCKET_FOR_INBOUND_INVENTORY mandatory?We have this and the equivalent one for outbound setup since day one, but we are wondering if we clear this field to blank if there are any negative effects. It seems li…
-
LPN scan cycle count adjustment does not show additional LPNs scanned qty as adjust in adjustment UISummary: LPN scan cycle count adjustment does not show additional LPNs scanned qty as adjust in adjustment UI But it shows for not counted LPNs as -adjustment Is there a…Ganesh_Somavanshi 21 views 5 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management -
What is the API for IB SHIPMENT first LPN received timeSummary: I can see IB SHIPMENT UI Screen has First LPN received Time stamp, But API is not returning these details Content (please ensure you mask any confidential infor…Kamalesan Govindasamy 11 views 2 comments 0 points Most recent by SOMA NARESH-Support-Oracle Warehouse Management
-
Updating reserve inventory quantitiesSummary: We have a scenario where we want to stop using one facility(facilty A) and transfer all the reserve inventory stock to the other facility(facility B) for that w…Swaroop Amanchi 11 views 1 comment 0 points Most recent by SOMA NARESH-Support-Oracle Warehouse Management
-
Customer Inventory Summary Export zip FilesSummary: Our the Customer Inventory Summary Export Generating ZIP Files Need Configuration to Increase Output Size Limit to not create Zip files Content (please ensure y…Chars_84 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
25B Logistics Roadmap, upcoming feature for WMS “Reconciliation enhancements to Fusion SCM phase 1”Summary: 25B Logistics Roadmap, upcoming feature for WMS “Reconciliation enhancements to Fusion SCM phase 1” – what are the details on this? Regarding the logistics-upda…David Wheaton 83 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
How to do a SQL Distinct in Python for label designerSummary: Can you help to make a distinct for this field in label designer please I already used these and none worked nunique("\~item.part_a") unique("\~item.part_a") se…Ernesto Porras 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Message codes screen extractSummary: Hi, When we extract the message codes screen, we can't see the information related to the facility message configuration. Is there any way — via WebReport, API,…
-
How to auto assign Pick Tasks based on the Destination companies on the Order HeadersSummary: How to auto assign Pick Tasks based on the Destination companies on the Order Headers. There are specific person who picks orders related to specific destinatio…Jonty Sen-Oracle 11 views 1 comment 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Prevent only some custom fields from being changedSummary: Prevent only some custom fields from being changed Content (please ensure you mask any confidential information): We use some important information in the custo…BrunoMoura 21 views 1 comment 0 points Most recent by Geno Hawkins- Support -Oracle Warehouse Management -
Not able to add container number barcode on serial number labelSummary: Hi Team, A business requirement is to add a barcode for the container/LPN number on the standard serial number label. In the label designer, we could not find t…K Sai Susheel Kumar 31 views 5 comments 0 points Most recent by K Sai Susheel Kumar Warehouse Management
-
How Can I create a Look up in label designer between 2 or 3 tables?Summary: How Can I create a Look up in label designer between 2 or 3 tables? For example, How can I translate this API to a python expression? entity/inventory/?values_l…
-
How to remove a lock when the new one is appliedAfter cycle counting process, a new lock code is applied to lost LPNs as "LOST" and the LPN has 2 lock codes on it. How can we remove the previous lock code? Is that pos…Duygu Coskun 21 views 3 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management -
How do we cycle count pallets(LPN) which have cartons(LPN)?Content We pack items in cartons(LPN) and then palletize(LPN) The pallet size is standardised but while performing cycle we should be able to confirm the exact number of… -
Auto Generate LPNSummary: First- For RF screen- RF-Text: Create {lpn}, When we set LPN prompt behaviour to "Autogenerate", there is a prompt to acknowledge. The user has to respond to mo… -
Can we stop showing unassigned tasks on the RFHi Team, The business users require that unassigned tasks not appear on the RF in the execute task screen. Could we achieve this in any way? When a task is unassigned, n…K Sai Susheel Kumar 21 views 2 comments 0 points Most recent by Girish Sheshappa Warehouse Management
-
Serial Number Discrepancy View PageHello, Can you explain more about what we see on the Serial Number Discrepancy View page? The quantity of an LPN is less than the serial number quantity within this LPN.…Duygu Coskun 11 views 3 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
Auto generating LPN number and Auto-printing LPN labelSummary: For RF module-Receive PO - Enter Qty, Screen parameter Print-Label is set to Inbound LPN label (for auto printing of LPN label once receiving completes) and LPN…
-
Unable map Batch# in WMS with Parent Lot in Inventory Fusion via Inventory Staged Transaction APIWe are facing a business challenge in mapping the "Parent Lot Number" while invoking the REST API "/fscmRestApi/resources/11.13.18.05/inventoryStagedTransactions". Its s…
-
It is possible to configure the storage so that if an LPN has not gone through a drop, it is not stoSummary: I want to know if it is possible to configure in storage that if an LPN has not been unloaded in a drop, it cannot be stored, in order to avoid lost LPNs. Conte…JuanCQuevedo 31 views 5 comments 0 points Most recent by Ana Strauti -Support-Oracle Warehouse Management
-
how to extend Oracle WMS cloud by developing custom screensSummary how to extend Oracle WMS cloud by developing custom screens Content hi, in Oracle ERP cloud, we can easily extend the custom functionality by developing the cust…Sachin Suresh Deshpande -- Infosys 132 views 4 comments 0 points Most recent by LSRIK Warehouse Management -
allow-new-lpn-scan RF parameters doesn't allow to enter a new LPN during cycle countSetting "allow-new-lpn-scan" RF parameter as "Yes" is not enough in order to record a new LPN during cycle count. The parameters "content-count" and "allow-new-lpn-scan"…