multiple instances of same vlan over aggr and assignment to zones
Hi Gurus
I need a help to clarify on vlan over aggr.
I am having 1x T4-1 server installed with Solaris 10 update 10.
I need to create 6 zones on this server with IPMP enabled for all the IPs in the zone. 8 Nic ports available. All the 6 zones will be assigned with vlan110.
Due to NIC ports limitation, i plan to create 2 aggregation (aggr1 and aggr2), create vlan on top of both the aggr, assign to zone and create ipmp in the zone.
aggr1 - 3 NIC ports
aggr2 - 3 NIC ports
My problem here is, i only able to create one instance of aggr110001(aggr1) and one instance of aggr110002(aggr2). Thus, once i assigned both the aggr110001 and aggr110002 to zone1 (ip-type=exclusive), the aggr is used up by zone1 and i do not know how to create additional instance from the aggr1 and aggr2, and assign to zone2 till zone6.
I need a help to clarify on vlan over aggr.
I am having 1x T4-1 server installed with Solaris 10 update 10.
I need to create 6 zones on this server with IPMP enabled for all the IPs in the zone. 8 Nic ports available. All the 6 zones will be assigned with vlan110.
Due to NIC ports limitation, i plan to create 2 aggregation (aggr1 and aggr2), create vlan on top of both the aggr, assign to zone and create ipmp in the zone.
aggr1 - 3 NIC ports
aggr2 - 3 NIC ports
My problem here is, i only able to create one instance of aggr110001(aggr1) and one instance of aggr110002(aggr2). Thus, once i assigned both the aggr110001 and aggr110002 to zone1 (ip-type=exclusive), the aggr is used up by zone1 and i do not know how to create additional instance from the aggr1 and aggr2, and assign to zone2 till zone6.
0