Best Of
Re: Local policy | routing advice
Hello Rajith
if the cost is the same ( higher preference ) in each PA of each LP I think the next matching key is the longest To , so in your case if call at 39962 arrives at SBC it should match higher preference ( Longest To match ) LP (39962, 487 ), so first SAG1 then, if failed ,to second SAG2 , then following lower preference LP (399, 48732) is chosen with first SAG3 and then SAG4 .
Same logic for call at 48732 , higher preference LP should be (399, 48732) with first PA SAG3 then, if failed , SAG4 , then lower preference LP (39962, 487) with SAG1 and then SAG2 .
So basically u should check if cost is the same and terminate recursion is disabled for all PA , and u should be set
by the way since this kind of routing is a bit weird I suggest u to test it , at the moment I cannot test it in my lab , mine is just the first idea .
Cheers
Antonio
Re: Full package build is failing after Deployment server OS upgrade to 2022
Thanks Cezar and JohanR for your recommendations. The below settings helped to resolve the issue.
On Windows the key registry DWORD:
HKLM\SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\KeepAliveTime = 900000
Thanks
Jitendra
Re: PNA - AP Extract PYAP_XDEDNCA
Hi Kaoro:
I would suggest you log an SR so that we can have a closer look at what happened.
Regards
Marilyn
Re: Absence Management and Time and Labor Fluid Technology
Thanks so much for posting this - I have been trying to tell clients that they need to upgrade to Fluid, and they are reluctant, but thanks to this posting, I can show them what I say is true.
For those who recently I responded in this community, this post can be your support doc to management to get current and get supported by the fine GSC staff. Thanks again my friend, and have a great day.
David L
DHLuding
Re: How to route to next-hop after a Cancel
Jorge
I'm not aware of your environment and your exact requirements but u can consider to parallel fork to both the PBX , it is a new feature to configure in LP starting from version 9.2 . In this case the SBC send INVITE in parallel to both the PBX , then if PBX-1 answers the SBC sends a CANCEL to PBX-2 or viceversa .
I suggest u to check it if interested , it is a parameter in LP but additional configuration have to be done to handle parallel forking .
https://docs.oracle.com/en/industries/communications/enterprise-session-border-controller/9.2.0/configuration/parallel-call-forking.html
Cheers
Antonio
Re: format time to 24 hour clock
Hi.
I did some more testing.
GetAuditInformation BSFN returns the following:
- 1:30 PM → 1330
- 9:54 AM → 954
Both 1330 and 954 are correct; however the time field is 4 digits long with 2 digits for the hour. So, I added a "0" to the hour to make it 2 digits if necessary.
Re: How to Add "My Work" to the Fluid Workcenter Grouplet Display Order Section for Expenses
The highlighted section from your screenshot for the "My Work" on the fluid expenses workcenter is not showing in our test environment. I also found the "Links" is also not showing. However, in DEMO those sections show up on the fluid expenses workcenter page as well as under Fluid Workcenter Grouplet Display Order section on the Configure Pagelets page.
Navigation: NavBar > Menu > FSCM > Enterprise Components > WorkCenter/Dashboards > Configure Pagelets
I have the configure pagelets page setup with the correct Fluid Workcenter Menu Item and I setup with the fluid system defined links on the My Work tab that are relevant to our organization. I did notice after I populated the fluid workcenter menu item, the "My Approvals" grouplet showed up under the display order. On the Links tab it only has links to classic pages, but I'd like to add links to fluid pages. How can I do that? When I try to add a link on this tab, the structure and content it displays for a menu appears to be for classic.
On the fluid expenses workcenter page, only the My Approvals, Queries, and Reports/Processes grouplet sections display. However, on the Classic expenses workcenter I see the My Work, Links, Queries, and Reports/Processes grouplet sections.
Navigation: NavBar > Menu > FSCM > PeopleTools > Portal > WorkCenters > Manage Workcenter Pages
When I go to the navigation you provided above, the "Expenses Workcenter" listed there has the exact same setup that you showed. I noticed that Menu Item relates to the classic expenses workcenter though and not the fluid expenses workcenter. I didn't see any other listed at that navigation for expenses on demo though. Is there a different navigation with simliar setup for fluid workcenter?
Re: How to Add "My Work" to the Fluid Workcenter Grouplet Display Order Section for Expenses
There is an issue we encountered when applying PUM upgrades in how new workcenters get populated via PUM. We had to create a new ADS set and migrate the delivered workcenter from our DEMO environment into our test environment to get everything working properly.
Hopefully that helps you resolve the missing setup/config issue.
Robert
Re: Is JD Edwards able to automatically account for revenue that is associated with a cost rule?
From Oracle Support: thank you for your post User EJ7JI.
Let's address this issue under a Service Request (SR) please - the forum is better for simpler "How To" questions, but an SR allows us to look at customer-specific data, configuration, and to hold a web conference where needed. Please attach a document to your SR showing the relevant configuration and a worked example please.
With regards,
-Matt
Re: How to reduce over completion transaction quantity in Discrete Job
Hi User_7S8Z1 -
As VHK-Oracle stated earlier, it's best to raise an SR to have a Support Engineer to review the WIP job data and provide any datafix required. The SR should be created with product code 572 (Work in process). Thanks.