Redwood
Discussion List
-
Send Outbound Message option not appearing in the Redwood PageHi @Jared L.-Oracle, @Victor Martin , @Thierry Lamote , @Shyam Patel When on the Edit Shipment UI page on the classic UI, the Actions icon used to show this option "Send… -
Not able to create locators using Upload functionality in RedwoodSummary: I am trying to create a locator in redwood using upload. I followed the below steps to upload. Navigate to Configure Subinventories task. Selected Inventory Org… -
Item not displayed in item shortagesHi, i've created an item that has "inventory item" and "Transaction enabled" set to yes. I've associated the item to a subinventory specifying "5" as minimum quantity an…
-
Why does the list of Inventory Organization show even Inactive onesSummary: We were trying to set Item Transaction defaults using Configure Item Transaction defaults but the LOVs keep on showing inactive IOs. Is there a way to removed t…
-
Redwood - Secondary Quantity Does Not Populate Primary QuantitySummary: When entering the Secondary Quantity, the Primary Quantity field is not auto populated. This does not happen for every inventory Redwood page, but it does speci…
-
Unable to update COO during Receiving (when COO was entered while creating the PO initially)Hi Team, The client has a requirement that when the Country of Origin (COO) is entered on the Purchase Order (PO), it should default onto the receiving line, and the rec…
-
Getting a 'INV_MATRX_INVALID_PJC_ATTIBUTE' errorSummary: A 'INV_MATRX_INVALID_PJC_ATTIBUTE' errror is thrown when attempting to issue material out of inventory which has been previously transferred into a Project/Task… -
Redwood | unable to populate DFF in transfer orderHi, i've defined some DFF for transfer order. Now when i create transfer order from "item quantities" redwood page, i can't see and populate the DFF. After, when the tra…
-
Make "Use Current Cost" Field Read-Only in Redwood UI (Miscellaneous Transactions)Summary: We have a requirement where the "Use Current Cost" field on the Miscellaneous Transactions page should be: Defaulted to "Yes" – this is achievable via the Manag…
-
Shipment status not getting updated to ManifestedHi @Jared L.-Oracle, @Victor Martin , @Thierry Lamote , @Shyam Patel We have completed all the prerequisite setups for Carrier manifest, but when running the ESS job: Se…
-
Redwood Self-Service Receiving Homepage Default CustomisationSummary: Is there someway to customise what a person can see as default when they enter Redwood Self-Service Receipting / My Receipts (New) ? I would like the Orders to …
-
White blank window popping up when I click on subinventory filter in Inventory Transactions(Redwood)Summary: When I go to Inventory transactions -> Completed Transactions in inventory management (Redwood) and try to filter the transactions by the subinventory, I get wh…
-
PO is not available on redwood ASN pageSummary: PO is not available on redwood ASN page, unless ESS job to create index definition and perform initial ingest to OSCS" with parameter "fa-scm-rcv-expected-po-re…Pritesh Shimpi-Oracle 24 views 2 comments 0 points Most recent by Pritesh Shimpi-Oracle Inventory Management
-
Redwood - How to Query Transfer Order without passing due dateSummary: Hi Team, We are now using the new Redwood pages for Transfer Orders. Currently, when querying existing Transfer Orders in the new Redwood page, a due date is re…Santhosh kumar Munagapati 29 views 4 comments 0 points Most recent by Adnan Siddiqui-Oracle Inventory Management
-
Unable to See “Zone Worker Assignment” Option in Advance InventoryHi everyone, I’m unable to view the Zone Worker Assignment option in the system, even though I’ve already assigned all the necessary privileges that should make this opt…
-
When trying to remove trx defaults against Sub– item, system is not deleting last line of DefaultWhen trying to remove transaction defaults against (Redwood page) Sub inventory – item, system is not deleting last line of Default. ex. item with multiple transaction t…
-
Redwood: How do you create a misc receipt for a valid item which has an on hand quantity of zero.Summary: In the new Redwood version for Inventory management, to create a miscellaneous receipt transaction it appears you have to go through the Item quantities page. H…Kathleen Fletcher 14 views 1 comment 0 points Most recent by Saravanan Veeraragavan Inventory Management -
Redwood PO Receipting Override distributions amounts, distribution amounts not the sameHi, When we receipt a Purchase Order in Redwood using the Override distributions amounts it states 'Make sure the sum of the distribution amounts is the same as the rece… -
Unable to Search Open Purchase Order on Redwood Page to Create ASNSummary: Hi, We are unable to search the Purchase Order Number to create ASN on Redwood Page (Purchase Order to Ship Tab). All the required roles are already assigned to…Mohit_Sharma-Oracle 200 views 3 comments 0 points Most recent by Pritesh Shimpi-Oracle Inventory Management
-
Locate and Open Positions when Redwood Search FailsLocate and Open Positions when Redwood Search Fails When the Redwood search fails to display a known position, and reasonable means to fix the issue fail, the following … -
Ship confirm Rule Field missing in Redwood Page: New Pick WaveHi @Jared L.-Oracle, @Victor Martin =, @Thierry Lamote , When we do manual create pick wave in the classic UI i can see this option/field : Ship confirm Rule : I can eit…
-
Issue with Project Transfer on Configure Subinventory Redwood PageSummary: Hi, We are encountering an issue on the Configure Subinventory (Redwood) page related to Project Transfer transactions. We have a subinventory 1204 (Quarantine …Mohit_Sharma-Oracle 13 views 0 comments 0 points Started by Mohit_Sharma-Oracle Inventory Management
-
unable to find user defined inventory transaction types in redwood mobile inventory pageSummary: Unable to find user defined inventory transaction types in the new redwood mobile inventory page. Content (please ensure you mask any confidential information):…hansel_Dsilva-Oracle 22 views 1 comment 0 points Most recent by Sankha1981-Oracle Inventory Management
-
Advanced Inventory - Track Employee Performance and Reward Employees in Oracle CelebrateSummary: With Advanced Inventory, you can now monitor the performance and throughput of your warehouse operators against established benchmarks and offer rewards points …Lynn Warneka-Oracle 26 views 0 comments 0 points Started by Lynn Warneka-Oracle Inventory Management -
Advanced Inventory Management – Does it support “Cartonize”-type grouping and LPN re-creation?Summary: Hello Experts In our receiving process, each pallet received from a Purchase Order creates an LPN. Later, there’s a need to build cartons based on serial scanni…
-
Not able to Customize DFF Fields for Miscellaneous Transactions Redwood UISummary: We have created DFF for Inventory Miscellaneous Transactions Redwood UI. We have business requirment to make a DFF attribute mandatory based in Transaction Type…Singulure Haritha-Oracle 16 views 3 comments 1 point Most recent by Mariana Castro-Oracle Inventory Management
-
Manual Delivery using Delivery workbench (receipt delivery)- Accounting/Completed Transaction ImpactSummary: When we create a manual Delivery - Description based, I do not find any accounting or review available under Complete transcations. Navigation- Inventory Manage…S, Aastha-Oracle 30 views 3 comments 0 points Most recent by Lynn Warneka-Oracle Inventory Management
-
How can I assign a default value in Mobile Inventory for the Subinventory field?Summary: No success assigning a default value for fields in Mobile Inventory Content (please ensure you mask any confidential information): In VBS, I am using the Config…
-
Mobile Inventory — Receive by Existing ReceiptIn Mobile Inventory, selecting Receive Goods prompts users to choose a Purchase Order (PO), Transfer Order (TO), or Shipment. There is no option to receive against an ex…
-
Slowness of Redwood UI'sHi, With Redwood UI's, we notice that they tend to perform slower compared to their Classic UI version. This applies to all Redwood UI's in general. For instance, let's …