Hi @Dirk Nieuwkamp, Kindly check if the Use Pick to Clean Process at Locations Using Warehouse Management preference is enabled under Set Up > Accounting > Accounting Preferences > Order Management > Picking/Packing section. If this preference is enabled, NetSuite WMS recommends the bin with the exact or highest available…

Hi there @Richard Appleford, Glad to see you here again! I checked on this and noted that there is currently no standard way to reverse work order issuance and this functionality is requested in Enhancement # 380633: Work Order with WIP = T > Reverse effect of Work Order Issue to release components. You can vote for the…

Hi there @User_EKY01, Thanks for creating another thread here in our community! Allow me to tag my colleagues who will be able to help you out with your concern. @Micah Timbol-Oracle / @Patrick Fresnosa-Oracle, any ideas about this one? To our other community members, feel free to share your insights on this as well. While…

Hi @User_7QVM7, Welcome to the community! We are glad to have you here with us today! ? To get you started, we recommend the following: Update your profile, add a profile picture and preferred username so other members can address you properly moving forward. You can check out Community Tip: Updating Your Profile! on how…

Hi there @User_SSCFB, Welcome to the community! We are glad to have you here with us! ? To get you started, we recommend the following: Update your profile, add a profile picture and preferred username so other members can address you properly moving forward. You can check out Community Tip: Updating Your Profile! on how…

Hi Tim, Yes, it is from an Item Fulfillment record. You are correct that this is a known system limitation which is filed under Enhancement # 166522. You can vote for it in the SuiteIdeas page. ========================= If you find this reply to your question as helpful, others with the same question might find it helpful…

Hi Dirk, Based on my investigation on this, even if you add a new Mobile - Table Column in the Page Element, it will not show in the WMS Mobile App because in order to add a custom column on the WMS Pick page, the scripts that are responsible for displaying the data on the table would need to be customized. Since these…

Hi Eric, Just to clarify, you want to be able to type filter by the Vendor Name using a Text field (like the Item: Name field) instead of a dropdown field, is this correct? Can you send some screenshots of this behavior as well? I am not able to reproduce it in my test account. When I filter using the Item: Vendor field,…

Hi @Dirk Nieuwkamp, We also performed a test on this, but we were not able to show a custom column in a data table in WMS Mobile App. I was also not able to find specific documentation on this on how to add a custom field in a data table. For this requirement, I suggest that you contact your Account Manager to get in touch…

Hi @Eric Kirkman, Thanks for providing detailed information and screenshots! I was able to test the behavior on my test account and was actually able to reproduce the behavior you mentioned with the following conditions: In the Saved Search, the "Item: Name" field used in the Available Filters tab There are multiple…

Hello @Eric Kirkman, I'm glad that we got the reorder point to work atleast. ? Now on to the other problem you are facing. Just want to clarify what field you arw referring to when you say 'amount'. I went back to the screenshot of the search results tab that you provided and noticed that there is no 'Amount' field there,…

Hi @NetSuite4All, Thanks for posting your concern here in the community! Is this what you are looking for? Based on my testing, the Bin column shows up for items which have Use Bins = T in the item record. Note that to be able to select a value in this column, there must be quantity in the bins. Hope this helps! ? -Ivy…

Hi @Eric Kirkman, Was my previous comment able to help with your concern? If so, we appreciate if you could click "Yes" on the “Did this answer your question?” at the bottom of my previous comment that helped you. By doing so, you'll be able to help other community members who might encounter the same concern. Hope you…

Hi Bryan, If you can't identify the problem in the UI, I think it would be best to file a support case for this so they can further check this in your account. We'd also appreciate it if you can update us of your findings. I'm sure this will also help other members who might encounter the same behavior. -Ivy

Hi @Toanne Termeer - van de Ven, I tested some formula using saved searches and here's what I came up with: HOUR: CASE WHEN (FLOOR(({custbody_schutte_woc_endtime}-{custbody_schutte_woc_starttime})*24)) < 0 THEN FLOOR(({custbody_schutte_woc_endtime}-{custbody_schutte_woc_starttime})*24)+24 ELSE…

Hi @Toanne Termeer - van de Ven, Maybe you can try using the FLOOR function. In saved searches, this is usually used to round down the values. The formula would be: FLOOR(n) where n is the formula you use to calculate the hour. Kindly try it out and let us know if it works for you. ? -Ivy ========================= If you…

You're welcome! I'm glad I was able to help you out, @Toanne Termeer - van de Ven! ? If it's not too much trouble, we would greatly appreciate if you can click "Yes" on “Did this answer your question?” below the comment/s that helped in your concern. This will also help other community members who might have the same…

Hi Toanne, There is no specific documentation on why it is labeled as "Bin Empty" but based on how it is used in the steps provided in the Warehouse Management Guide, I think that it should be mainly used or clicked when the Bin you are picking from becomes empty or when you want be routed back to the Select Pick Task page…

Hi @Toanne Termeer - van de Ven, Thanks for checking on this! I also tried to look for the enhancement number, but was unable to find it. I think the correct enhancement # is 551278 (without the 3 in the beginning). Just a typo error. ?✌ This enhancement is still open, but for some reason, I am also unable to find it in…

Hi @User_HPB3I, Kindly try this Customer Saved search if this will give what you require. Criteria > Standard tab: Criteria > Summary tab: Results tab: (You can add other fields as necessary) Results of the search which does not show any Customers with Projects within the last 6 months: Note that you can also use other…

Hi Bryan, Is the Multi-Location Inventory feature enabled on your account? If so, kindly verify in the Purchase Order if there is a Location set in the item line level. Another thing to check is the status of the Purchase Order. Make sure that it is not Pending Approval and the item line is not Closed. Here are some…

Hi @Kathy W, Welcome to NS Support Community and thank you for posting your concern here! For new members, we suggest that you visit the NetSuite Support Community - Frequently Asked Questions (FAQs) for more information regarding the community. We also encourage that you update your profile and add a profile picture. You…

Hi there @Jeanine S., Glad to have you back with us today and thank you for posting your concern here in our community! Allow our gurus/members some time to check this for you and we will provide an update on this thread. Also tagging @Michelle Jabanes-Oracle -- we need your expertise on this one Mich. Any ideas? ? To…

Hi @Mark_BRIT, I checked on this and there is no standard item dashboard in the system. However, I have confirmed that something like this might be possible by customizing your dashboard and using Custom Portlets and Custom Searches. You can refer to the Dashboards Guide for more information about this. Depending on your…

Hi @Asher_123, I created this new thread regarding your concern on changing the headers on the Item Record > Sales/Pricing tab > Pricing sublist. This would be best handled by our Gurus with specialty in customization. @Joahnna Given Uy-Oracle / @Jack Daryl Espiel-Oracle, any ideas about this? To our other members, feel…

Hi @Toanne Termeer - van de Ven, Do you see the "Bin Empty" button in WMS Mobile App? I found that Bin Empty only serves one purpose. It allows the user to process a new pick task or select from a different bin. When clicked, the user is redirected to the Select Pick Task page. If there is a partially picked quantity, the…

Hi @User_UBHHS, Here is an article explaining the Behavior of Criteria Main Line in an Item Fulfillment Saved Search (SuiteAnswers 73404). You are correct that selecting Yes or No for the Main Line will change the results, so it is best to select Either/Any, or just remove the Main Line in the Criteria, since it will be…

Hi @Asher_123, I checked my resources on this, but it seems that this is not currently possible in the system. The closest preference I found related to your concern is the Drill Down preference when setting up the Custom Search portlet. You can choose to open the drill down in a New Page or in the Portlet. I also found a…

Hi @Asher_123, Are you referring to the Quantity Pricing in the Item Record? You can add new columns to this sublist by editing the field value of the Maximum # of Quantity-based Price Levels preference in Setup > Accounting > Accounting Preferences > Items/Transactions tab > Sales/Pricing section. Let us know if this…

Hi @Toanne Termeer - van de Ven, You may want to check out SuiteAnswers 87092 - Posting Item Fulfillments for Partially Picked Orders. Hope this helps! ? -Ivy ========================= If you find this reply to your question as helpful, others with the same question might find it helpful as well. By marking “Yes” on the…