Shorin Rio Daa-Oracle Gold Trophy

Hi @dle_35705, Since you already checked if there are any transactions causing the status to be committed but it seems there is none, this might be an indication that the Serial Number is stuck at the backend. This appears to be a possible defect, and it requires opening a case to further investigate. If you need…

Hi @User_BQX47, Exposing the sub-components of your member items for your kits in Saved Searches would require multiple level of join or subqueries which is a known system limitation and is currently logged under enhancement #125071: Saved Search: Support multiple levels of Join or Sub-queries. If you can observe in our…

Hi @User_2MNG9, Can I also get a screenshot of the results tab of your search? I will try to recreate this search on my end. Thank you!

Hi @Gavrah Rabba, glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you…

Hi @User_2MNG9, Apologies for the late revert on this one. Just would like to confirm if you would like to populate all these information in a single Saved Search? Or different Saved Searches? To clarify further, this is an item search where these information will be taken from the Item360 tab of the item record instead of…

@IT楽教研究所toya さん、こんにちは。 標準原価計算を使用するように構成されたアイテムの値の再計算に使用される在庫原価再評価レコードに関連する場合、このレコードは、「アイテムおよび在庫」サブタブの「設定」>「会社」>「機能を有効化」で標準原価計算機能が有効になっている場合に使用できます。 この機能を有効にすると、「トランザクション」>「在庫」>「在庫原価を再評価」の順に選択して、UIで在庫原価再評価レコードにアクセスできます。 標準原価計算アイテムの参照として使用できる関連SuiteAnswers記事は次のとおりです: 標準原価計算 標準原価在庫の再評価 在庫原価再評価の手動入力 ありがとうございます!

@IT働楽研究所toya　さん、こんにちは。 連絡が遅くなり申し訳ありません。 在庫タイプのアイテムで取引する場合、NetSuiteでは、原価計算方法に基づいてそのアイテムの移動の評価が考慮されます。 @市倉丈寛/Ichikura Takehiroさんに同意します。在庫タイプのアイテムには直接的な機能はありません。提供したオプションを確認し、さらに質問や説明がある場合は、このディスカッションについて自由にコメントしてください。 ありがとうございます!

Hi @User_9MC03, The ability to add Add Percentage Column to Pivot Table in SuiteAnalytics Workbook is a known system limitation and is currently logged under enhancement number 571524 SuiteAnalytics Workbook > Calculated Measures > Percentage of Column Total. Kindly refer to this SuiteAnswers article for more information…

Hi @User_DURVQ, glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you…

Hi @Tom Dalton, Thank you for letting us know. Glad you were able to resolve your concern. Regards, Sho

Hi @Mitzi B., glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you know…

Hi @User_GJSVY, It is a standard behavior that changing the accounts of Other Charge for Purchase item has a retrospective effect meaning it will also update previous transactions. If we are looking for a way where we can update this and not to affect previous transactions, it is currently a known system limitation and…

Hi @Adam W, If these fields are mandatory in the Purchase Order then we need to allow this fields to be exposed in the transactions. Since some of your transactions like Purchase Orders are using the per-line class and per-line departments, hiding these fields may not be the best option. Thank you!

Hi @Adam W, Yes, that would be the effect if these fields are required in your Purchase Order. In my previous comment I did mention that the first option applies to all transaction that uses per-line class and per-line departments. Thank you. Regards, Sho

Hi @CDuf, glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you know…

Hi @User_FZNHI, glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you…

Hi @Adam W, Just would like to check if you had the time to read my previous comment? Let me know if you still require further assistance. Regards, Sho

@IT働楽研究所toya　さん、 前のコメントを読まれましたか? まだサポートが必要な場合はお知らせください。 よろしくお願いいたします。 ショウ

Hi @KNason76, glad to have you with us today, and thanks for posting here in the NetSuite Support Community! Greetings, everyone! We have a fellow member who could use our assistance. Please don't hesitate to share your knowledge and insights to help them out. Your input is highly valued and appreciated! — In case you know…

Hi @Adam W, Apologies for the confusion. Our test environment is not yet in the 2025.1 version that is why we are having a different behavior. I tried and tested this out in a test environment in 2025.1 version and I was able to reproduce the behavior that you are experiencing. Currently, the fields are not customizable…

Hi @Dale Glen, As a workaround, we may need to create two Saved Searches and manually combine them in excel. Unfortunately, having to combine two different search into one where the fields are not available on both is a known system limitation. You can also reach out to your Account Manager for possible engagement with our…

Hi @Adam W, Just would like to check if you had the chance to read the previous comment of my colleague? Let me know if you still require further assistance. Regards, Sho

Hi @Dale Glen, Thank you for the screenshot. I tested this in my account and I recreated your search and noticed the same behavior, the Component Yield and BOM Quantity is empty. Tried to use a test account without Advanced BOM and recreated the search and I was able to expose the values of these fields. Based on testing,…

Hi @luthfirian, Have you seen our last comment? Let us know if the information provided was helpful. 😊 We would greatly appreciate if you can click "Yes" on “Did this answer your question?” on the previous comment. This will also help other community members who might have the same concern find the answer easier. Hope you…

Hi @Dale Glen, In addition, can you provide the Criteria and Results tab of your search? I will try to recreate the search in my test account. Thank you! Regards, Sho

Hi @Dale Glen, To better understand your concern, kindly provide the following: Provide a screenshot of your search and identify the information that is incorrect and what is your expected value. What were the changes you made on your BOM Revisions? Thank you! Regards, Sho

Hi @luthfirian, Based on testing, this is the Standard Behavior when using the Lot Auto Numbering Inventory Detail form which is the customized form. To still be able to use the functionality of Express Entry button, we need to use the Standard Inventory Detail form. I hope this clarifies your concern. Thank you! Regards,…

Hi @Adam W, Just to confirm further, the screenshots were taken from the Assembly Build record? And that is also the record that you are trying to customize? Thank you.

Hi @Tom Dalton, Just would like to check if you had the chance to read my previous comment? Let me know if you still require further assistance. Regards, Sho

さん、こんにちは。 @IT働楽研究所toya 連絡が遅くなり申し訳ございません。 さらに確認したところ、移動平均原価計算を月次ベースで行うオプションはまだありません。これは既知のシステム制限であり、現在、カスタム平均原価計算方法を選択できるように、「機能改善＃122220: Setup>Accounting>Set up Accounting」に記録されています。 ご不便をおかけして申し訳ございませんが、ご理解の程よろしくお願いいたします。